ZPR2620 | 2-ZONES

The ZPR2620 2-Zone mixer is the only 1U installation mixer featuring Hill Audio’s unique CascadeZone © system, which allows the 2nd output to act either just as a second master or as a second zone, with each output sporting comprehensive rear-panel configuration controls. 2 microphone inputs are complemented by 6 stereo inputs, out of which two can be switched to microphone sensitivity – which makes the ZPR2620 a unique blend between microphone mixer and stereo line mixer. Another Hill Audio innovation is the FOH input, providing a solution to venues with occasional live music events – allowing to feed the FOH system with an external balanced stereo input signal. The ZPR2620 is the default choice for a hospitality venues’ background music control.

• 6 stereo inputs with signal-present-LED, rear-panel gain and front-panel level control
• 2 stereo channels switchable to microphone
• 1 balanced stereo input (FOH input)
• Front panel 3.5mm stereo TRS input
• 2x Mic inputs with rear-side 1/4” TRS connectors
• 12V phantom power for microphones by internal jumper
• Voice-specific 2-Band EQ plus “on air” switches for mic inputs
• Adjustable auto talk-over for automatic music level reduction when microphone is used
• One stereo output zone and one mono output zone
• 5 LED level meter for every zone
• CascadeZone ©: Mono zone source selectable from Input 1-5 or stereo zone signal
• Rear-side adjustable maximum level control  for each zone
• Balanced XLR and Phoenix output connectors; stereo zone with additional unbalanced RCA connectors
• 2-Band master EQ (front-side for stereo zone, rear for mono zone)
• Emergency input which shuts down master output when emergency signal comes in and plays emergency signal instead
• Output mute contact to externally mute the output
• PFL section with volume control and front-side 6.3mm stereo jack
• Unbalanced record output
• • Signal/Noise ＞82dB (Line)
  • Crosstalk Damping ＞65dB (Line)
  • THD ＜0.05% (Line)
  • Frequency response 20Hz – 20 kHz
  • Dimension 483.0×44.5×183.5 mm WxHxD
  • Weight 2.2 kg

  • EMC/Safety Compliance:

    • EU safety: EN 60065:2001 +A1
    • EU EMC: EN55103-1:1997, EN55103-2: 1997
    • US safety: UL60065
    • US EMC: FCC Part 15

    This product meets both the EMC Directive 2004/108/EC and the Low Voltage Directive 2006/95/EC.

    Environmental Compliance:
    

    • This product is manufactured in accordance with EG directive 2002/95/EG of the European Union on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS).
    • This product does not contain more than 0.1% of weight of the SVHCs listed in annex XIV of the REACH regulation EC 1907/2006.