Hill Audio IMA202 Zoning Wall Amp

by Hill
$630.00

IMA202 WALL AMP

The IMA202 is a wall-mount version of the popular IMA200 rack-mount media amplifier, perfect for all locations where no rack space is available, like in small retail outlets of coffee shops. It combines MP3 replay and FM tuner reception as music sources with a microphone input and a high-headroom power amplifier in one compact unit. Apart from its main output, an additional zone output is available. Depending on the application, the unit can be configured to either use the internal amplifier as a stereo amplifier and an external amplifier for the zone signal, or to use the internal amplifier as a dual mono unit, one for the main and one for the zone signal. A music on-hold output allows to feed the unit’s music program into a telephone system. Adding the seamless integration with fire evacuation systems, the IMA202 is the perfect all-in-one solution for applications with space limitations.

  • Mixer section with one music and one microphone source
  • Music source switchable between internal media player/tuner, 3 external rear-side connected line sources (with gain control) and one front-side 3.5mm stereo TRS line input
  • Internal media player/tuner with file/folder access for USB thumbdrives/SD cards up to 16GB/2000 songs, MP3 file name readout on large LCD display, regular and random play sequence, elapsed/remain time mode, FM tuner mode with RDS station display, jingle player with up to 3 jingles and additional scheduled play mode
  • Microphone input with phantom power, isolation transformer, low-pass filter, rear-side gain control, front-side volume control, front-side on/off switch and 2-band-EQ
  • Adjustable auto talk-over for automatic music level reduction when microphone is used
  • Master section with precision 41-click volume control and 2-Band EQ
  • Additional rear-side maximum level control for master
  • Zone section with separate volume control assignable to master signal or to two of the rear-side line inputs
  • Linear power amplifier section
  • Bipolar power devices
  • Two independent mono amplifier blocks with 80W@4Ohms / 50W@8Ohms RMS power each
  • Noiseless convection cooling
  • Over-temperature protection
  • Linear power supply with toroidal transformer
  • Amplifier blocks can be assigned to carry master stereo signal or mono master and mono zone signal each
  • Internally selectable 80Hz high pass filter for every amplifier block
  • Binding post speaker outputs
  • Preamp output configurable to carry same signal as internal amplifier block inputs or zone signal in stereo
  • MOH (music on hold) output with adjustable music and mic levels, isolation transformer and selectable music source from any of the 4 line inputs
  • Emergency input which shuts down master output when emergency signal comes in and plays emergency signal instead
  • Output mute contact to externally mute the output
    • Power, stereo: 2×50/80 @ 8/4 Ohms
    • Frequency response: 20Hz-20kHz +/- 1dB
    • THD < 0.05%
    • Damping factor > 300
    • Dimensions: 450x260x46mm WxHxD
    • Weight 4.9kg
    • EMC/Safety Compliance:

      • EU safety: EN 60065:2001 +A1
      • EU EMC: EN55103-1:1997, EN55103-2: 1997
      • US safety: UL60065
      • US EMC: FCC Part 15

      This product meets both the EMC Directive 2004/108/EC and the Low Voltage Directive 2006/95/EC.

      Environmental Compliance:

      • This product is manufactured in accordance with EG directive 2002/95/EG of the European Union on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS).
      • This product does not contain more than 0.1% of weight of the SVHCs listed in annex XIV of the REACH regulation EC 1907/2006.